The mixer circuit below has 3 line inputs and 3 mic inputs. The mic inputs are suitable for low impedance 200-1000R dynamic microphones. An ECM or condenser mic can also be used, but must have bias applied via a series resistor. As with any mixer circuit, a slight loss is always introduced. The final summing amplifier has a gain of 2 or 6dB to overcome this. The Input line level should be around 200mV RMS. The mic inputs are amplified about 100 TImes or by 40dB, the total gain with the mixer is 46dB. The mic input is designed for microphones with outputs of about 2mV RMS at 1 meter. Most microphones meet this standard.
相关文章
- 汽车仪表与报警系统_汽车仪表盘报警符号_汽车仪表盘报警灯
- 减轻对电网冲击的高阻抗电弧炉
- 高通收购nxp的首要挑战是什么?
- 传感器有多强大,一滴汗全面解析身体健康
- 景逸X6较为硬朗的造型风格,新车将提供1.3T、1.5T和2.0L三种动力,将会在今年内上市
- 稳懋半导体Q1实现净利润3.73亿元 称全球5G发展趋势不变
- CISSOID和中科院电工所建立战略合作关系 共同推动碳化硅功率器件应用
- 教你选用汽车防盗产品
- 安森美低功耗资产标签为工业资产管理带来无与伦比的5年电池使用寿命
- 高性能低功耗EPIC规格宽温级单板计算机ReadyBoard
- 车牌识别停车场系统的工作原理详解
- 可穿戴设备电源设计需要注意的关键事项